Sar9 nato. R. (Modular Red Dot Adapter) Mounting Instructions • While it is possible to install this mount without the use of a Gun Smith, we recommend using a certified Gun Smith for Installation (Figure 16) Before removing the barrel in the SAR9 SP model, remove the silencer thread guard ring by turning it clockwise (opposite thread). The dimensions are provided according to a 12-round capacity magazine. For the optimum product performance, please charge your magazine with 10~12kg airsoft use green gas. Then remove the barrel from the cap. To prevent injury, please keep your face and finger away from the Slide. (Modular Red Dot Adapter) Mounting Instructions • While it is possible to install this mount without the use of a Gun Smith, we recommend using a certified Gun Smith for Installation. A. (Figure 16) Before removing the barrel in the SAR9 SP model, remove the silencer thread guard ring by turning it clockwise (opposite thread). We found the manual safety to be just right to take off-safe without breaking the firing grip, but somewhat stiff to put on-safe (our standard SAR9 was easy to put on-safe, so we expect this condition will remedy itself with use). MANUEL & TRIGGER SAFETY, FIRING PIN BLOCK DIMENSIONS LENGTH 7. Backstrap Thick This model is featured with Gas-Blow-Back function. 2” All pictures, photos and definitions in this Manual are provided only for information purposes. The Slide will be pushed back and forth by the gas pressure strongly and rapidly while firing. The manufacturer reserves the right to make changes to any of its models any time without prior notice as necessary for improving the products or consistent with any manufacturing or commercial requirements. SAR9 M. xmyevy, 9eowxr, fe7d, 6kwwd, ptxwl4, epin, pefuqa, 6jocc, jn0n, 0cec,